dotnet-msbuild

Analyze MSBuild binary logs to diagnose build failures. USE FOR: build errors that are unclear from console output, diagnosing cascading failures across multi-project builds, tracing MSBuild target execution order, and generally any MSBuild build issues. Requires an existing .binlog file. DO NOT USE FOR: generating binlogs (use binlog-generation), non-MSBuild build systems.

Generate MSBuild binary logs (binlogs) for build diagnostics and analysis. USE FOR: adding /bl:{} to any dotnet build, test, pack, publish, or restore command to capture a full build execution trace, prerequisite for binlog-failure-analysis and build-perf-diagnostics skills, enabling post-build investigation of errors or performance. Requires MSBuild 17.8+ / .NET 8 SDK+ for {} placeholder; PowerShell needs -bl:{{}}. DO NOT USE FOR: non-MSBuild build systems (npm, Maven, CMake), analyzing an existing binlog (use binlog-failure-analysis instead).

Diagnose and fix under-parallelized MSBuild builds. USE WHEN a multi-project solution build is slower than expected, doesn't speed up when you add cores, pegs a single core while others idle, or you want to know why `-m` isn't helping. Note: `/maxcpucount` default is 1 (sequential) — always pass `-m` for parallel builds. Covers finding the critical path (longest serial ProjectReference chain), graph build (`/graph`), BuildInParallel, and solution filters (`.slnf`). DO NOT USE FOR: single-project builds, incremental issues (use incremental-build), compilation slowness inside one project (use build-perf-diagnostics), non-MSBuild build systems.

Establish build performance baselines and apply systematic optimization techniques. USE FOR: diagnosing slow builds, establishing before/after measurements (cold, warm, no-op scenarios), applying optimization strategies like static graph builds, artifacts output, and dependency graph trimming. Start here before diving into build-perf-diagnostics, incremental-build, or build-parallelism. DO NOT USE FOR: non-MSBuild build systems, detailed bottleneck analysis (use build-perf-diagnostics after baselining).

Diagnose MSBuild build performance bottlenecks using binary log analysis. USE FOR: identifying why builds are slow by analyzing binlog performance summaries, detecting ResolveAssemblyReference (RAR) taking >5s, Roslyn analyzers consuming >30% of Csc time, single targets dominating >50% of build time, node utilization below 80%, excessive Copy tasks, NuGet restore running every build. Covers timeline analysis, Target/Task Performance Summary interpretation, and 7 common bottleneck categories. Use after build-perf-baseline has established measurements. DO NOT USE FOR: establishing initial baselines (use build-perf-baseline first), fixing incremental build issues (use incremental-build), parallelism tuning (use build-parallelism), non-MSBuild build systems.

Detects MSBuild projects with conflicting OutputPath or IntermediateOutputPath. USE FOR: builds failing with 'Cannot create a file when that file already exists', 'The process cannot access the file because it is being used by another process', intermittent build failures that succeed on retry, or missing/overwritten outputs in multi-project or multi-targeting builds where bin/obj (or project.assets.json) collide. Common causes: shared OutputPath, missing AppendTargetFrameworkToOutputPath, extra global properties (e.g. PublishReadyToRun), or SetTargetFramework on a ProjectReference to a single-targeting project. DO NOT USE FOR: file access errors unrelated to MSBuild (OS-level locking), single-project single-TFM builds, non-MSBuild build systems.

Choosing an MSBuild CopyToOutputDirectory / CopyToPublishDirectory mode: Never, PreserveNewest, Always, and IfDifferent (MSBuild 17.13+), plus $(SkipUnchangedFilesOnCopyAlways). USE FOR: removing the per-build Always copy perf hit; resetting output files mutated between builds. DO NOT USE FOR: general incremental-build diagnosis (use incremental-build); non-MSBuild build systems.

Guide for organizing MSBuild infrastructure with Directory.Build.props, Directory.Build.targets, Directory.Packages.props, and Directory.Build.rsp. USE FOR: structuring multi-project repos, centralizing build settings, implementing NuGet Central Package Management (CPM) with ManagePackageVersionsCentrally, consolidating duplicated properties across .csproj files, setting up multi-level Directory.Build hierarchy with GetPathOfFileAbove, understanding evaluation order (Directory.Build.props → SDK .props → .csproj → SDK .targets → Directory.Build.targets). Critical pitfall: $(TargetFramework) conditions in .props silently fail for single-targeting projects — must use .targets. DO NOT USE FOR: non-MSBuild build systems, migrating legacy projects to SDK-style (use msbuild-modernization), single-project solutions with no shared settings.

Guide for diagnosing and improving MSBuild project evaluation performance. USE FOR: builds slow before any compilation starts, high evaluation time in binlog analysis, expensive glob patterns walking large directories (node_modules, .git, bin/obj), deep import chains (>20 levels), preprocessed output >10K lines indicating heavy evaluation, property functions with file I/O ($([System.IO.File]::ReadAllText(...))), multiple evaluations per project. Covers the 5 MSBuild evaluation phases, glob optimization via DefaultItemExcludes, import chain analysis with /pp preprocessing. DO NOT USE FOR: compilation-time slowness (use build-perf-diagnostics), incremental build issues (use incremental-build), non-MSBuild build systems.

Guide for MSBuild extensibility: CustomBefore/CustomAfter hooks, wildcard imports with alphabetic ordering, import gating with control properties, NuGet package build extension layout (build/buildTransitive), and the MicrosoftCommonPropsHasBeenImported guard. USE FOR: diagnosing and fixing MSBuild import and hook patterns, reviewing and fixing extension point anti-patterns in Directory.Build files, fixing missing Exists() guards on imports that break fresh clones, fixing NuGet package hooks being silently dropped instead of appended, making build targets extensible for other projects, injecting custom logic into the build pipeline, creating NuGet packages that extend the build, conditionally disabling imports. DO NOT USE FOR: target authoring patterns (use target-authoring), props vs targets placement (use directory-build-organization), general anti-patterns (use msbuild-antipatterns), non-MSBuild build systems.

Fix MSBuild targets that generate files during the build but those files are missing from compilation or output. USE FOR: generated source files not compiling (CS0246 for a type that should exist), custom build tasks that create files but they are invisible to subsequent targets, globs not capturing build-generated files because they expand at evaluation time before execution creates them, ensuring generated files are cleaned by the Clean target. Covers correct BeforeTargets timing (CoreCompile, BeforeBuild, AssignTargetPaths), adding to Compile/FileWrites item groups, using $(IntermediateOutputPath) instead of hardcoded obj/ paths. DO NOT USE FOR: C# source generators that already work via the Roslyn pipeline, T4 design-time generation that runs in Visual Studio, non-MSBuild build systems.

Guide for optimizing MSBuild incremental builds. USE FOR: builds slower than expected on subsequent runs, 'nothing changed but it rebuilds anyway', diagnosing why targets re-execute unnecessarily, fixing broken no-op builds. Covers 8 common causes: missing Inputs/Outputs on custom targets, volatile properties in output paths (timestamps/GUIDs), file writes outside tracked Outputs, missing FileWrites registration, glob changes, Visual Studio Fast Up-to-Date Check (FUTDC) issues. Key diagnostic: look for 'Building target completely' vs 'Skipping target' in binlog. DO NOT USE FOR: first-time build slowness (use build-perf-baseline), parallelism issues (use build-parallelism), evaluation-phase slowness (use eval-performance), non-MSBuild build systems.

Patterns for managing MSBuild item groups: Include/Remove/Update semantics, item metadata, batching with %(Metadata), transforms, per-item filtering, and cross-product batching pitfalls. USE FOR: diagnosing and fixing item group anti-patterns in .csproj files, reviewing item management for correctness, fixing CS2002 duplicate file warnings from SDK globbing, fixing targets that run more times than expected due to cross-product batching, fixing Include vs Update misuse on SDK-globbed items, fixing FileWrites registration for generated file clean support, moving generated files to IntermediateOutputPath. DO NOT USE FOR: target chain architecture (use target-authoring), property patterns (use property-patterns), incrementality (use incremental-build), general anti-patterns (use msbuild-antipatterns), non-MSBuild build systems.

Detect and fix MSBuild anti-patterns in project and build files. USE WHEN asked to review, audit, lint, clean up, or code-review a .csproj/.vbproj/.fsproj/.props/.targets/.proj (or Directory.Build.props/.targets) file, when asked 'is this project file correct?' or 'what's wrong with my build file?', or when hunting subtle build bugs caused by how a project is authored. Each anti-pattern has a symptom and a concrete BAD→GOOD fix. DO NOT USE FOR: non-MSBuild build systems (npm, Maven, CMake), or migrating a project to SDK-style (use msbuild-modernization).

Guide for modernizing and migrating MSBuild project files to SDK-style format. USE FOR: converting legacy .csproj/.vbproj with verbose XML to SDK-style, migrating packages.config to PackageReference, removing Properties/AssemblyInfo.cs in favor of auto-generation, eliminating explicit <Compile Include> lists via implicit globbing, consolidating shared settings into Directory.Build.props. Indicators of legacy projects: ToolsVersion attribute, <Import Project="$(MSBuildToolsPath)">, .csproj files > 50 lines for simple projects. DO NOT USE FOR: projects already in SDK-style format, non-.NET build systems (npm, Maven, CMake), .NET Framework projects that cannot move to SDK-style.

MSBuild property definition patterns: conditional defaults, composition/concatenation, path normalization, trailing-slash handling, TFM detection helpers, and evaluation order. USE FOR: diagnosing and fixing property definition issues and shared-property anti-patterns in .props/.csproj; DefineConstants or NoWarn overwritten instead of appended; unconditional assignments that block project-level overrides; unquoted conditions that fail on empty properties; hardcoded paths that break cross-platform builds; setting overridable defaults; property evaluation order and last-write-wins semantics. DO NOT USE FOR: props vs targets placement (use directory-build-organization), item operations (use item-management), target structure (use target-authoring), general anti-patterns (use msbuild-antipatterns), non-MSBuild build systems.

Guide for interpreting ResolveProjectReferences time in MSBuild performance summaries. Activate when ResolveProjectReferences appears as the most expensive target and developers are trying to optimize it directly. Explains that the reported time includes wait time for dependent project builds and is misleading. Guides users to focus on task self-time instead. Do not activate for general build performance -- use build-perf-diagnostics instead.

Canonical patterns for writing custom MSBuild targets. USE FOR: diagnosing and fixing custom target authoring anti-patterns; broken SDK target chains across files (e.g., Directory.Build.targets silently redefining SDK targets); targets that replace CompileDependsOn instead of extending it with $(CompileDependsOn); query targets returning stale results from Outputs vs Returns misuse; missing Inputs/Outputs causing unnecessary rebuilds; missing FileWrites registration. Covers DependsOnTargets vs BeforeTargets vs AfterTargets, the Build→CoreBuild three-level pattern, and the $(XxxDependsOn) chain-extension pattern. DO NOT USE FOR: incremental build tuning (use incremental-build), parallelization (use build-parallelism), general anti-patterns (use msbuild-antipatterns), non-MSBuild build systems.